Hayes Microcomputer Products DIVA T/A Manual de usuario descargar pdf (Pagina 84)

DIVA T/A PC Card User’s Guide 84

Dumping the DIVA T/A Memory

Should a fatal error occur while the DIVA T/A is being used, you will

need to capture a memory dump of the card. The following events are

symptomatic of a fatal error:

all connections are dropped

D-channel and B-channel LED status indicators are flashing

alternately

The DIVA T/A does not respond to AT commands, even after

exiting and restarting the terminal emulation program

if the DIVA T/A is removed and then re-inserted into its slot,

the following message is displayed in the terminal emulation

program:

EiconCard Fatal Error (

error description

)>>

Note: If you receive the Fatal Error message above, do not

type AT at the >> prompt. Instead, jump directly to Step 6 in

the steps below.

Follow the steps below to obtain a card dump:

The sequence of steps for performing a card dump differ

depending upon whether the system still responds to AT

commands. Refer to the following table and perform the

appropriate action:

AT Commands Response Step Sequence

Normal response Enter AT$Z <Enter> to display the

prompt (>>). Continue from step 5.

No response Continue from step 2.

Make sure to exit any terminal emulation program application

that may send characters to the DIVA T/A COM port.

Remove your DIVA T/A card from the slot and immediately

reinsert it.

Execute a terminal emulation program and open the COM port

associated with your DIVA T/A card.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 92 93

Sin comentarios

Hayes Microcomputer Products DIVA T/A Manual de usuario Pagina 84